Philips 42PFL5606, 32PFL3406 Switch on or off EasyLink, Use one-touch play, Use one-touch standby

Press (Standby-On) on the TV’s or device’s remote control.

»» The TV and all connected HDMI devices switch to standby.

Note

•• The EasyLink-compliant device must be switched on and selected as the source.

•• Philips does not guarantee 100% interoperability with all HDMI CEC devices.

Switch on or off EasyLink

When you play an HDMI-CEC compliant device, the TV switches on from standby, and switches to the correct source.

Note

•• If you do not intend to use Philips EasyLink, switch it off.

1 Press MENU.

2 Select [Setup] > [TV settings] > [EasyLink] > [EasyLink].

3 Select [On] or [Off], then press OK.

Use one-touch play

1 After you switch on EasyLink, press play on your device.

»» The TV automatically switches to the correct source.

Use one-touch standby

When you press on the TV remote control, the TV and all HDMI-CEC compliant devices switch to standby mode.

1

Set TV speakers to EasyLink mode

If you connect an HDMI-CEC compliant device		sh
that includes speakers, you can choose to hear		ng l i
the TV from those speakers instead of the TV		E
speakers.
When you play content from an EasyLink
compliant home theatre, if you want to mute
the TV speakers automatically, turn on EasyLink
mode.
1	Connect an HDMI-CEC compliant device
2	to the HDMI connector.
	Connect an audio cable from the SPDIF
	OUT connector to the EasyLink-compliant
3	device’s AUDIO IN connector.
	Configure the HDMI-CEC compliant
	device properly (see the device user
4	manual).
	Press MENU.
5	Select [Setup] > [TV settings] >
6	[EasyLink] > [TV speakers].
	Select one of the following, then press OK.

• [Off]: Switch off TV speakers.

• [On]: Switch on TV speakers.

• [EasyLink]: Stream TV audio through the connected HDMI-CEC device. Switch the TV audio to the connected HDMI-CEC audio device through the adjust menu.

• [EasyLink autostart]:Turn off TV speakers automatically and streams TV audio to the connected HDMI-CEC audio device.

Note

•• To mute the TV speakers, select [TV speakers] > [Off].

Select speaker output with Options menu If [EasyLink] or [EasyLink autostart] are

selected, access the Options menu to switch
the TV audio.
1	While you watch TV, press OPTIONS.
2	Select [Speakers], then press OK.

EN 33