Philips 46PFL5907, 55PFL5907 Connecting the antenna or the cable, Plugging in the AC power cord

Connecting the antenna or the cable

Be sure your antenna or other device is connected properly before plugging in the AC power cord.

If you connect to an antenna through RF cable

Any DTV programs that are broadcasted in your area can be received for free through an antenna connection.

cable

antenna

OUT

IN RF cable

If you connect a set-top box through RF cable

If the TV is connected to a cable box or satellite set-top box via a coaxial connection, set the TV to channel 3, 4 or the channel specified by the service provider.

	antenna		RF cable
IN			IN
		RF cable	OUT
			set-top box

If you connect a set-top box through HDMI

If the TV is connected to a cable box or satellite set-top box via HDMI, make sure you select the correct Source by using SOURCE.

		RF cable
IN	OUT	IN
	HDMI cable	set-top box

If you connect a set-top box through Component Video Input

If the TV is connected to a cable box or satellite set-top box via Component Video Input, make sure you select the correct Component Video Source by using SOURCE.

Audio dongle	Audio (L/R) cables
IN
IN		RF cable
	OUT	IN
Component dongle	Component OUT	set-top box
	(Y/Pb/Pr) Video cables

12

Connecting a set-top box, Blu-ray / DVD recorder via composite connectors and Analog Audio

Do not place your recorder too close to the screen because some recorders can be susceptible to signals.

Composite dongle OUT set-top box

IN	Audio (L/R) +
	Video cables	IN
	Audio (L/R) +
	Video cables

OUT

IN RF cable OUT

IN	Blu-ray disc /
cable	DVD recorder

OUT RF cable

Note

•If you have any question about the DTV’s antenna, visit www.antennaweb.org for further information.

•Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters) for HDTV signal.The minimum RF bandpass on these devices is 2,000MHz or 2GHz.

•For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the antenna Input jack before moving the unit.

•If you did use an antenna to receive Analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than a set-top box or inside antenna.

•To Turn On your reception source easily between antenna and cable, install an antenna selector.

•If you are not receiving a signal from your cable service, contact the Cable provider.

•Only the left loudspeaker reproduces sound for mono equipment. Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.

Plugging in the AC power cord

Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are made.

Caution

•Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V~240V).

•Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks.

Note

•Each time you plug in the AC power cord, no operations will be performed for a few seconds.This is not a malfunction.

English