7.CLEANING INSTRUC- TIONS (CONT.)
7B.ONCE EVERY 4-8 WEEKS
8. HQ4 REPLACE-
MENT HEADS
9. IMPORTANT |
BATTERY |
R
7A. ONCE A WEEK
1 . Clean Razor Head Assem- bly as shown (Fig. 6).
2.Press Razor Head Re- lease Button and lift Razor Head Assembly using thumb and index finger to remove from razor housing (Fig. 7).
3.Clean inside of Razor Head Assembly and Hair Chamber with long bristles of brush.
4.Press Razor Head Assem- bly back on razor hous- ing.
6 |
7 |
IMPORTANT: Do NOT interchange the cutters and combs. They are a matched set and if interchanged may adversely affect shaving performance until cutters reseat themselves. Therefore, remove, clean, and replace each set individually.
1.Remove Razor Head Assembly (Fig. 7).
2 . While holding Razor Head Assembly in one hand, press center wheel down while turning counterclockwise to re-
8 |
9 |
lease frame and lift out. Set frame aside (Fig. 8).
3 . Remove one cutter/ comb, at a time, out of frame as shown (Fig. 9).
4.Cutter should be held as shown and brushed in an upward motion (Fig. 10). Clean inside of comb with long bristles of brush in a circular motion.
5.For consistently close and comfortable shaves, razor heads should be cleaned and lubricated every
10 |
11 |
a degreasing liquid (e.g. Norelco Razor Cleaner, RAZORMATE Electrosonic Cleaner or alcohol).
6. While holding Razor Head Assembly in one hand, gently place one cutter/comb back into Assembly (Fig. 11).
7.Repeat procedure for other two cutting heads.
8.Replace frame, with
cutting heads in place, back into Razor Head Assembly. While press- ing down, turn wheel clockwise to lock frame into place (Fig. 12).
9 . P r e s s R a z o r H e a d Assembly back on razor housing.
10.Spread Norelco Razor Lubricant, model AL80, or one drop of mineral oil over floating heads with your finger.
12 |
AND RAZOR
ACCESSORIES
Replacement Heads:
The
DO NOT USE shaver sharpeners as this will damage your blades and lifters and will adversely affect the shaving perfor- mance.
NOTE: It is recommended that you replace your razor heads once a year.
Razor Cleaners:
Norelco RAZORMATE Electro- sonic Heads Cleaner, model ERC100.
Norelco Razor Cleaner, model RC1776.
Norelco Razor Lubricant, model AL80.
Norelco Razor Accessories may be purchased at a store near you, at an Authorized Norelco Service Location, or by using the handy order form enclosed.
DISPOSAL |
INFORMATION |
When discarding your razor:
THIS NORELCO RAZOR CONTAINS
Refer to enclosed instruc- tion sheet for directions on removing rechargeable bat- teries.
CAUTION:
■Batteries should be re- moved by consumer only when razor is to be discarded.
■Make sure razor is un- plugged before disman- tling for battery re - moval.
■All servicing or battery replacement should be per- formed by an Authorized Norelco Service Location only.
60-Day Money-Back Guarantee
To enjoy the closest and most comfortable shave from your new Norelco Men’s Razor, the razor should be used exclusively for 3 weeks. This allows your hair and skin enough time to adapt to the Norelco Shaving System. If, after that period of time, you are not fully satisfied with your Norelco Men’s Razor, send the product back and we’ll refund you the full purchase price.
The razor must be shipped prepaid by insured mail, insurance prepaid, and have the sales slip, indicating purchase price and the date of purchase, enclosed. The razor must be postmarked no later than 60 days after the date of purchase. Norelco reserves the right to verify the purchase price of the razor and limit refunds not to exceed suggested retail price.
Send dated sales slip, your complete name and address as indicated below, and the razor, prepaid to:
Norelco Consumer Products Company
A Division of Philips Electronics North America
Corporation
P.O. Box 1116
Skokie, IL 60076
Please allow
Please Print!
NAME:
ADDRESS:
CITY:
STATE:ZIP:
TELEPHONE NO.: ( | ) |
Area Code
REASON FOR RETURNING:
