GE JCBP67, JCBP65, JCBP70 To remove the cover, To replace the cover, To remove the storage drawer

Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions

Care and cleaning of the range.

Wire cover holder.

Oven Light Replacement

CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel.

Be sure to let the light cover and bulb cool completely.

To remove the cover:

Hold a hand under the cover so it doesn’t fall when released. With fingers of the same hand, firmly push back the wire cover holder. Lift off the cover.

Do not remove any screws to remove the cover.

Replace bulb with a 40-watt appliance bulb.

To replace the cover:

Place it into groove of the light receptacle. Pull wire forward to the center of the cover until it snaps into place.

Connect electrical power to the range.

Storage Drawer Removal (on some models)

To remove the storage drawer: To replace the storage drawer:

Pull the drawer out all the way.

Tilt up the front and remove it.

Clean under the range.

Insert glides at the back of the drawer beyond the stop on range glides.

Lift the drawer if necessary to insert easily.

Let the front of the drawer down, then push in to close.

26