GE JCB710 Tips Consumer, Temperature Conversions, Convenience Outlet on some models, Power Outage

www.GEAppliances.ca

Oven Control, Clock and Timer Features and Settings

Safety

AUTOMATIC OVEN Light (on some models)

This lights anytime the oven has been programmed using the COOK TIME or START TIME functions.

OVEN LIGHT or Pad

Touch this pad to turn the oven light on or off.

– Pad

Short taps to this pad will decrease the time or temperature by small amounts. Touch and hold the pad to decrease the time or temperature by larger amounts.

+ Pad

Short taps to this pad will increase the time or temperature by small amounts. Touch and hold the pad to increase the time or temperature by larger amounts.

CLEAN Pad (on some models)

Touch this pad to select the self-cleaning function. See the Using the self-cleaning oven section.

CLEAN Light

Flashes while in edit mode—you can change the length of time for the self-clean cycle at this point. Glows when the oven is in the self- clean cycle. After the self-clean cycle, the light will turn off. Unlatch the door.

OFF Pad

Touch this pad to cancel ALL oven operations except the clock and timer.

BROIL Pad

Touch this pad to select the broil function.

BROIL Light

Flashes while in edit mode—you can switch from HI to LO BROIL at this point. Glows when the oven is in broil mode.

Indicator Lights (on some pads)

EDIT mode lasts several seconds after the last pad press. START TIME and COOK TIME will be the only pads lit if either of these options is selected. (Example: START TIME is selected with BAKE—the START TIME pad will remain lit until the clock reaches the programmed time, at which point it will turn off and the BAKE pad light will light up).

Instructions Operating Instructions Care and Cleaning

Temperature Conversions

Fahrenheit°	140	150	170	200	250	275	300	325	350	375	400	425	450	475	500	525	550
Celsius°	60	65	75	95	120	135	150	160	175	190	205	220	230	245	260	275	290

Convenience Outlet (on some models)

Troubleshooting

The 120V convenience outlet located on the top of the backguard may be used to plug in small electrical appliances.

When using the outlet, be sure that the electrical cord does not rest on or near a surface unit.

If the surface unit is turned on, the cord will be damaged.

To reset the circuit breaker, press the switch located near the outlet on top of the backguard.

Tips Consumer

Power Outage

If a flashing time is in the display, you have experienced a	To reset the clock, touch the CLOCK pad. Enter the
power failure. Reset the clock.	correct time of day by touching the + or – pads.
	Touch the START/ON pad.
	11

Support