18
Pause TV
18.1
What You Need
You can pause a digital TV broadcast and resume watching it
later.
To pause a TV programme you need…
• a connected USB Hard Drive formatted on this TV
• digital TV channels installed on this TV
• to receive channel information for the on screen TV Guide
You cannot use Pause TV when you are Recording.
For more information, press the colour key Keywords and
look up USB Hard Drive, installation.
18.2

Pause a Programme

Pause

To pause and resume a broadcast…
To pause a broadcast, press (Pause). A progress bar appears
briefly on screen.
To call up the progress bar, press (Pause) again.
To resume watching, press (Play). A small icon on top of
the time of broadcasting is shown on screen.
You can pause a broadcast for a maximum time span of 90
minutes.
To switch back to the actual TV broadcast, press (Stop).
Progress bar
To show the progress bar, press (Pause) when you paused a
programme, or press (Play) when you resumed a programme.
With the progress bar on screen, press (Rewind) or
press (Forward) to select from where you want to start
viewing the paused broadcast. Press these keys repeatedly to
change speed.
Whilst recording a programme on the USB Hard Drive, you
cannot pause a broadcast.

Replay

With the USB Hard Drive connected and formatted, the TV
stores the TV broadcast you are watching. When you switch to
another channel, the broadcast of the former channel is
cleared. Also when you switch the TV to Standby the broadcast
is cleared.
Since the TV stores the broadcast you are watching, you can
mostly replay the broadcast for a few seconds.
To replay a current broadcast…
1 - Press (Pause)
2 - Press (Left). You can press repeatedly until you reach
the start of the broadcast storage or the maximum time span.
54