Also, before you can switch on Audio Description, you have to
switch on Accessibility in Setup.
With Audio Description, a narrator's commentary is added to
the normal audio.
To switch on the commentary (if available)…
1 - While watching a TV channel, press OPTIONS.
2 - Select Accessibility > Audio Description and press OK.
3 - Select On and press OK.
You can check if an audio commentary is available.
In the Options menu, select Audio Language and look for an
audio language marked with a .
Mixed Volume
You can mix the volume of the normal audio with the audio
commentary.
To mix the volume…
1 - Press and press (left) for Setup.
2 - Select Accessibility > Audio Description > Mixed Volume
and press OK.
3 - Use the arrows up and down to set the slider bar.
4 - Press OK to confirm.
5 - Press BACK repeatedly if necessary, to close the menu.
If an audio language with added audio commentary is available,
you can also find this setting in OPTIONS > Accessibility >
Mixed Volume.
Audio Effect
Some audio commentary can hold extra audio effects, like
stereo or fading sound.
To switch on Audio effects (if available)…
1 - Press and press (left) for Setup.
2 - Select Accessibility > Audio Description > Audio Effects
and press OK.
3 - Select On and press OK.
4 - Press BACK repeatedly if necessary, to close the menu.
Speech
The audio commentary can also hold subtitles for the words
which are spoken.
To switch on these subtitles (if available) . . .
1 - Press and press (left) for Setup.
2 - Select Accessibility > Audio Description > Speech and
press OK.
3 - Select Descriptive or Subtitles and press OK.
4 - Press BACK repeatedly if necessary, to close the menu.
24.8
Network
For more information, press the colour key Keywords and
look up Network.
24.9
Installation Antenna/Cable

Update Channels

Automatic Channel Update
If you receive digital channels, you can set the TV to
automatically update these channels.
Once a day, at 6 AM, the TV updates the channels and stores
new channels. New channels are stored in the Channels List and
are marked with a . Channels without a signal are
removed. The TV must be in Standby to automatically update
channels. You can switch off Auromatic Channel Update.
To switch off the automatic update…
1 - Press and press (left) Setup.
2 - Click Antenna/Cable Installation > Automatic Channel
Update and click Off.
3 - Press BACK repeatedly if necessary, to close the menu.
When new channels are found or if channels are updated or
removed, a message is shown at TV start up. To avoid this
message to appear after every channel update, you can switch it
off.
To switch off the message…
1 - Press and press (left) Setup.
2 - Click Antenna/Cable Installation > Channel Update
Message and click Off.
3 - Press BACK repeatedly if necessary, to close the menu.
In certain countries, the Automatic channel update is done while
watching TV or on any moment when the TV is in Standby.
Manual Channel Update
You can always start an channel update yourself.
To start a channel update manually…
1 - Press and press (left) Setup.
2 - Click Antenna/Cable Installation > Search for Channels and
click Update.
3 - Follow the instructions on screen. The update may take a
few minutes.
76