Make the Connection
To make a wired connection…
1 - Connect the router to the TV with a network cable
(Ethernet cable**).
2 - Make sure that the router is switched on.
3 - Press and press (left) Setup.
4 - Click Network and click Connect to Network.
5 - Click Wired. The TV constantly searches for the network
connection.
6 - A message will be shown when the connection is successful.
If the connection fails, you can check the DHCP setting of the
router. DHCP should be switched on.
**To fulfill EMC regulations, use a shielded FTP Cat. 5E Ethernet
cable.
3.2
Network Settings

View Network Settings

You can view all current network settings here. The IP and
MAC address, signal strength, speed, encryption method, etc.
To view the current network settings…
1 - Press and press (left) Setup.
2 - Click Network and click View Network Settings.
3 - Press BACK repeatedly if necessary, to close the menu.

Network Configuration

If you are an advanced user and want to install your network
with Static IP addressing, set the TV to Static IP.
To set the TV to Static IP…
1 - Press and press (left) Setup.
2 - Click Network and click Network Configuration.
3 - Click Static IP and return to Network.
4 - Click Static IP Configuration and configure the connection.
5 - Press BACK repeatedly if necessary, to close the menu.

Switch On with Wi-Fi (WoWLAN)

You can switch this TV on from your smartphone or tablet if the
TV is in Standby. The setting Switch On with Wi-Fi
(WoWLAN) must be switched on.
To switch on WoWLAN…
1 - Press and press (left) Setup.
2 - Click Network and click Switch on with Wi-Fi (WoWLAN).
3 - Click On.
4 - Press BACK repeatedly if necessary, to close the menu.

Digital Media Renderer - DMR

If your media files do not play on your TV, make sure that the
Digitial Media Renderer is switched on. As a factory setting,
DMR is switched on.
To switch on DMR…
1 - Press and press (left) Setup.
2 - Click Network and click Digital Media Renderer.
3 - Click On.
4 - Press BACK repeatedly if necessary, to close the menu.

Wi-Fi Miracast

Switch on Wi-Fi Miracast to share the screen of your
smartphone, tablet or computer on the TV.
For more information, press Keywords and look
up Miracast™, switch on.

Wi-Fi Smart Screen

To watch digital TV channels on your smartphone or tablet with
the Philips TV Remote App, you must switch on Wi-Fi Smart
Screen. Some scrambled channels might not be available on your
mobile device.
To switch on Wi-Fi Smart Screen…
1 - Press and press (left) Setup.
2 - Click Network and click Wi-Fi Smart Screen.
3 - Click On.
4 - Press BACK repeatedly if necessary, to close the menu.

TV Network Name

If you have more than one TV in your home network, you can
give the TV a unique name.
To change the TV name…
1 - Press and press (left) Setup.
2 - Click Network and click TV Network Name.
9