Philips 51PW9527, 46PW9527 manual Video Recorder Playback

CONNECTING PERIPHERAL EQUIPMENT

Video Recorder : Playback

1 Connect the RF cable to the RF socket on your video recorder.

2 Connect another RF cable from the output of your video recorder to the ANTENNA IN 75Ω socket on your TV.

3	Better playback quality can be obtained if you also connect the
	Video,Audio Left and Right (only for stereo equipment) cables to
	the VIDEO and AUDIO L (mono) and R inputs of
	INPUT-AV 2.
	Note : In case of mono equipment, only the left loudspeaker	2	3
	reproduces sound. Use a mono-to-stereo adapter (not supplied)
	for sound reproduction via the internal loudspeakers.
	The MONITOR OUT connectors can be used for daisy chaining		A/V OUT
		RF OUT	RF IN
	or recording programmes from your TV. See page 23.

S-VHS-Video quality with an S-VHS video recorder is obtained by
connecting the S-VHS-Video cable with the S-VIDEO input instead
of connecting the video recorder to the VIDEO input. See the	VIDEO RECORDER
handbook for the video recorder.

If You Do Not Make the Video and Audio

Connections in Step 3 Above :

Search for and store the test signal of the video recorder.

1 Unplug the RF cable from the RF socket of your video recorder.

2 Switch on your TV and put the video recorder on the test signal or play a prerecorded tape. See the handbook for your video recorder.

3 Search for the test signal of your video recorder in the same way you searched for and stored the TV signals. See pages 9 and 10.

4 Store the test signal under programme number 0 or between 90 and 99.

5 Replace the RF cable in the RF socket of your video recorder after you have stored the test signal.

CABLE

1

20