
CONNECTING PERIPHERAL EQUIPMENT
S-Video Equipment
Note :
1 Connect an
2 Connect the audio cables to the equipment’s AUDIO L (mono) and AUDIO R sockets and to the
REAR OF TV
2
1
AUDIO OUT |
AV3 and AV4 Digital High-definition Inputs
When you have digital equipment with 1080i or 480p signal output (60Hz) or 576p signal output (50Hz), connect it to the AV4 or AV5 inputs on your TV. Examples of such equipment are digital
DVD PLAYER
Connecting to AV3
Connect digital equipment with component video output (usually labeled
Note :The AV3 sockets are compatible with some digital equipment hav- ing RGB outputs with “sync on green” or RGB with “separate H and V sync.” Output standards for digital equipment, however, may vary by man- ufacturer. No industry standards have been established for HD television RGB signal systems, timing, synchronization, and signal strengths. If the digital equipment you want to connect to your TV offers both compo- nent video and RGB outputs, component video is the suggested connec- tion to use. See the handbook for the digital equipment.
Connecting to AV4
Connect digital equipment with RGB or
Note :The AV4 input cannot be used to connect a computer or any other VGA device.
Notes regarding connecting to either AV3 or AV4 :
•See the handbook for the
•If you notice scrolling images, wrong colors or no color, no picture or even combinations of these on your screen, check to see if the con- nections have been done properly.
REAR OF TV
REAR OF TV
23