Philips 535 manual Network for connections, Isn’t available when connecting

from your operator the information items described in the present section and enter them as given.

With some operators, access parameters can be set «over the air». Please check directly by your operator.

Network account

Allows you to choose a data profile from the ones you have set (see “Access settings” page 44 for complete in- formation on how to configure or modify a data pro- file). This profile and the parameters it features will then be used for connection.

Bearer

This menu allows you to select the type of network used when launching a connection.

GSM	Your mobile will only use the GSM
	network for connections.
GPRS	Your mobile will only use the GPRS
	network for connections.
GPRS first	Your mobile will first try to connect
	to the GPRS network, then to the
	GSM network if the GPRS network
	isn’t available when connecting.

If selecting GPRS first, you must have configured both the GSM and GPRS settings (see “Access settings” page 44).

MMS Centre

Allows you to enter or change the MMS address of the server your phone will connect to.

Gateway address

Allows you to enter or change the IP address of the server’s gateway.

Gateway port

Allows you to enter or change the Port number of the server’s gateway.

You must have the information relating to the three points above, supplied by your operator, and must enter them exactly as given.

Application settings

Retrieval mode

Automatic Any new MMS you receive is automatical- (default ly downloaded from the server and placed

mode) in the Inbox, without you having to launch a connection. Select the message you have received in the Inbox and press >.

This mode is deactivated when roaming.

66 Messages