Side connections
| AUDIO | |
2 | VIDEO | |
S•VID | EO | |
|
1
3
Camera, Game or Camcorder
&Connect your camera, game or camcorder as shown.
éConnect to VIDEO 2 and AUDIO L 3 for mono equipment. For stereo equipment also connect
AUDIO R 3.
Do not connect cable 1 and 2 at the same time. This may cause picture distortion !
Headphone
&Insert the plug into the headphone socket L as shown.
éPress ¬ on the remote control to switch off the internal loudspeakers of the TV.
The headphone impedance must be between 8 and
4000 Ohm. The headphone socket has a 3.5 mm jack.
In the Sound menu select Headphone volume to adjust the headphone volume.
To select connected peripherals
B
vAMP DVD/R TV SAT AUX
†
v Select
Ò ‡ π
®
º
æb
&Press the v key repeatedly or select Source in the Setup menu (see p. 10) to select AV1, AV2, HDMI (AV3), Side or TV channels, according to where you connected your devices.
éPress the cursor up/down.
“Press OK.
Remark: Most equipment (decoder, recorder) carries out the switching itself. This is however never the case with a computer connected to the HDMI input.
Record with your recorder
Record a TV programme
You can record a TV programme using your recorders tuner without affecting your TV.
&Select the channel number on your recorder.
éSet your recorder to record.
See the handbook for your recorder.
Switching channel numbers on your TV does not disturb recording !
Record a programme from MONITOR OUT
You can record a programme on your recorder from the TV tuner via MONITOR OUT.
&Switch on the device.
éSelect the channel or wanted device on your TV and the correct input on your recorder.
“Set your recorder to record.
You record the tuner channel of the TV or selected device.
Do not switch channels or turn off your TV when you are recording through MONITOR OUT.
20