Philips 55PP9753/17 setup guide Cable Box with RF IN/OUT, Cable Box with A/V Outputs, Antenna

Making Basic Connections to the TV

Cable Box with RF IN/OUT				Incoming
				Cable TV
Connect the incoming cable TV signal to the CABLE IN				Signal
jack on the back of the cable box.
1 Connect a coaxial cable (not supplied) to the TO TV jack					Back of Cable Box
on the back of the cable box and to the ANTENNA IN 75Ω	Back of TV			1	(example only)
2 jack on the back of the TV.
Set the Output Channel switch on the back of the cable box	AMP SWITCH		2		OUTPUT
ANTENNA IN 75Ω					CH
to CH 3 or 4 (whichever is correct for your cable box),	EXT	INT		CABLE	TO TV 3 4
3 then tune the TV to the corresponding channel. Once tuned,		_		IN
change channels at the cable box, not the TV.	+				3
NOTE: This connection will not supply stereo sound to the TV.			HD INPUT-AV 4
		DVI
The reason is that the RF output on a cable box—labeled “TO	CENTER CHANNEL AMP INPUT
TV,” “OUT,” or “OUTPUT,” for example—will not send a stereo			HD INPUT-AV 3
			G/Y
signal to the tuner (VHF/UHF) input on a TV.
INPUT-AV 1		OUTPUTINPUT-AV 2 SUBWOOFER	R/Pr
	Y		B/Pb
VIDEO		VIDEO
S-VIDEO		S-VIDEO
L	Pb		V
L		L	L	L
			SYNC
AUDIO	Pr	AUDIO	AUDIO	AUDIO
			H
R		R	R	R

Cable Box with A/V Outputs

					Back of TV
Connect the incoming cable TV signal to a signal splitter
1 (not supplied).	2	ANTENNA IN 75Ω		AMP SWITCH
				EXT	INT
The signal splitter enables you to avoid having to use the				+	_
TO TV jack on the back of the cable box. This jack will not						HD INPUT-AV 4
supply stereo sound to the TV.					DVI
			CENTER CHANNEL AMP INPUT
NOTE: Your cable box may have a different label for the						HD INPUT-AV 3
TO TV jack, such as OUTPUT or OUT.				4		G/Y
		INPUT-AV			INPUT-AV 2 SUBWOOFER	R/Pr
Connect a coaxial cable (not supplied) to a connector on
				Y		B/Pb
		VIDEO
the signal splitter and to the ANTENNA IN 75Ω jack on		S-VIDEO			S-VIDEO
		L		Pb		V
		L			L	L	L
2 the TV.						SYNC
		AUDIO		Pr		AUDIO	AUDIO
		R			R	H R	R
Connect a coaxial cable (not supplied) to a connector on
the signal splitter and to the CABLE IN jack on the back of
3 the cable box.						CV1:None
Connect A/V cables (not supplied) to the VIDEO and					Source OK	AV2:None
						AV3:None
AUDIO L and R outputs on the back of the cable box and						AV4:None
						Side:None
4 to the AV2 video (labeled V) and audio (labeled L and R)
jacks on the back of the TV.
To view programs from your cable box, first press the
5 Source button on the remote control.
Press the Cursor Down or Up buttons until the AV2 signal						6
6 source is selected.					5
Press the OK button to confirm your selection. The AV2

input source becomes current for the viewing of cable TV
7 programs through your cable box.	7
NOTE: If your cable box Audio/Video outputs will not supply	6
video and stereo audio to the TV, you will need to make the
connection shown above in the example “Cable Box with
RF IN/OUT.”

Audio R (red)

Audio L (white)

Video (yellow)

OUTPUT

CH

	3	4
CABLE	TO	VIDEO	L AUDIO R
IN	TV	OUT	OUT
	3		1

Incoming

Cable TV

SignalSignal

Splitter

HELPFUL HINT

Your TV remote is capable of oper- ating accessory devices such as cable boxes. See the sections on “Programming the Remote Control” and “Operating Accessory Devices with the TV Remote” in the Directions for Use manual that came with the TV.

Watching Cable TV Programs That

Don’t Require the Cable Box

Since you’ve connected the cable TV signal directly to the TV’s tuner (step 2 above), you can also watch the unscrambled pro- grams by simply tuning to the desired channel. You must first use Autoprogram, however, to store channels in the TV’s memory. See page 7.

NOTE: This connection will supply stereo sound to the TV if it is being broadcast by the station you are watching.

Antenna

Connect the incoming antenna signal to the ANTENNA IN 75Ω jack on the back of the TV. See page 7 for details on using Autoprogram to store channels in the TV’s memory.

NOTE: This connection will supply stereo sound to the TV if it is being broadcast by the station you are watching.

Incoming

Antenna

Signal

				Back of TV
ANTENNA IN 75Ω	AMP SWITCH
	EXT	INT
	+	_
				HD INPUT-AV 4
	CENTER CHANNEL AMP INPUT			DVI
				HD INPUT-AV 3
				G/Y
				R/Pr
INPUT-AV 1		OUTPUT	INPUT-AV 2	SUBWOOFER
	Y			B/Pb
VIDEO			VIDEO
S-VIDEO			S-VIDEO
L	Pb		L	V
L			L	L	L
				SYNC
AUDIO	Pr		AUDIO	AUDIO	AUDIO
				H
R			R	R	R

2