IMPORTANT! Initial TV Setup
When you turn on your TV for the first time it will prompt you to enter some setup information about Language preference and Channel program- ming. See page
LanguageAutoprogram
Select your menu language with the cursor up/down.
Press the OK key on the remote control to confirm.
Using the TV Buttons
Your television has a set of buttons located on the front of the cabinet for use when the remote control is not needed or unavailable.
1 Press the Power button to turn the TV on.
2 Press the VOLUME + (up) button to increase the sound level or the VOLUME – (down) button to lower the sound level. Or use the buttons to navigate right or left when the
3 Press the CHANNEL K (up) or L (down) button to select TV channels. Or use the buttons to navigate up and down when the
Picture Sound Features Channels
TV
Settings
Demo
Install
Exit 
5
4
5
To access the
To remove the menu, Press CHANNEL Down to select Exit. Then press the MENU button,
2 | 4 |
|
4 | Blue LED indicator | |
|
|
31
45
Using the Remote Control
Installing the Batteries
To load the supplied batteries into the remote:
1 Remove the battery compartment door on the back of the remote.
2 Place the batteries
3 Reattach the battery compartment door.
Be sure to point the remote at the Remote Sensor window on the front of the television when using it to operate the television.
3
Remote Control
(shown from the bottom)
1
HELPFUL HINT
When the batteries in your remote control run low, the remote control will send a “Battery low” command to the TV. The TV will then display a message on the screen reminding you to replace the batteries as soon as possible.
2
3
