5.
Inserting
Lotion
Cartridge
4
3
FIRST USE
1Take one cartridge from the box.
2Remove the supplied connector out of the little bag. Push it into the plastic cap of cartridge until you hear it “click” into place (Fig. 3).
3Slide the back cover of razor down to remove from razor (Fig. 4).
4Slide the cartridge, with the connector in place, into position in razor. The connector should slide into the recess area with hole located at the top of razor. The white round dot on the connector must face down towards the razor (Fig. 5).
5Replace back cover on razor and press it down into position until it snaps shut.
Replacing
Used
Cartridge
5 |
1Slide back cover off razor.
2Remove the empty cartridge from the cover and pull out the connector. DO NOT discard the connector.
3Rinse out the cartridge compartment with hot water before replacing cartridge.
Air dry thoroughly.
4Insert the connector into the new cartridge. Push connector into the plastic cap of cartridge until you hear it “click” into position.
