9 |
Maintenance Instructions
10 |
11 |
8.
To Clean Trimmer
1Brush the outside of Trimmer after every use.
2Lubricate Trimmer teeth twice a year with Norelco Razor Lubricant, model AL80, or one drop of mineral oil.
3The Trimmer may be flipped open to clean the inside (Fig. 9).
Important
•Always switch Razor OFF and remove from charging base before cleaning.
•Always store Razor with Protective Razor Head Cap on shaving heads.
•Never clean, remove or replace head assembly while motor is on.
•Do not apply pressure to combs. Do not touch razor heads with hard objects as this may dent or damage
•Do not use razor if combs are damaged or broken. Facial injury may occur.
After Each Use
1Switch Razor OFF.
2Press the Razor Head Release Button located under razor heads on front side of Razor (Fig. 7).
3Flip open the Razor Head Assembly and clean the razor heads and hair chamber by running under hot water (Fig. 10 & Fig. 11). Water from the tap should be on a hot setting BUT BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS.
