you will not be using your razor for an extended
period of time, it is recommended that you remove
the cartridge and clean the razor following
maintenance instructions before storing.
To Connect Trimmer
1 Switch the razor OFF.
2 Clean the razor and razor head assembly by
running under hot water before installing
Trimmer.
3 Press the button located on front side of razor,
directly under the shaving heads to remove head
assembly from razor (Fig. 7).
4 Remove razor head assembly from razor by
pulling up and away from razor.
5 Connect Trimmer assembly to razor body (Fig.8).
To Use Trimmer
1 Turn razor on.
2 Hold Trimmer to exact hairline desired.
Move Trimmer downward with gentle pressure.
3 Trim beard,moustache or sideburns using the
Trimmer.
4 Turn razor OFF when finished.
To Remove Trimmer
1 Turn razor OFF.
2 Press button located on front side of razor,
directly under the shaving heads,to unlock and
remove Trimmer assembly from razor.
3 Replace razor head assembly.
Click-OnTrimmer
8
7.