Connecting Antenna or Cable / Satellite / IPTV Box
Be sure your Antenna or another Device is connected properly before plugging in the AC Power Cord.
If connecting to an Antenna through an RF cable
Any DTV Programs that are Broadcast in your area can be received for free through an Antenna Connection.
|
| Cable |
IN | antenna |
|
| RF cable | OUT |
|
|
If connecting Cable / Satellite / IPTV Box using an RF cable
If the TV is connected to a Cable / Satellite
antenna |
| RF cable |
|
| |
|
| IN |
|
| OUT |
IN | RF cable | |
|
|
If connecting Cable / Satellite / IPTV Box using an HDMI cable
If the TV is connected to a Cable / Satellite
IN | HDMI cable |
|
RF cable
OUT IN
If connecting Cable / Satellite / IPTV Box using Component Video Input
If the TV is connected to a cable / satellite
|
| RF cable |
| OUT | IN |
|
| |
IN | Component (Y/Pb/Pr) |
|
IN | Video cables | |
|
OUT
12 .English
Connecting a Cable / Satellite / IPTV Box,
Do Not place your Recorder too close to the Screen because some Recorders can be susceptible to harmful interference from the TV.
OUT | Cable |
RF cable | IN | |
| ||
RF cable | OUT | OUT |
Audio (L/R) + | |
Video cables | |
IN | IN |
IN | OUT |
| |
Audio (L/R) + Video cables | |
| recorder |
Note(s)
●If you have any question about the DTV’s Antenna, visit www.antennaweb.org for further information.
●Depending on your Antenna system, you may need different types of combiners (mixers) or separators (splitters) for HDTV Signal. The minimum RF bandpass on these Devices is 2,000MHz or 2GHz.
●For your safety and to avoid damage to this Unit, please unplug the RF Coaxial Cable from the Antenna Input jack before moving the Unit.
●If you did use an Antenna to receive Analog TV, it should also work for DTV reception. Outdoor or attic Antennas will be more effective than a
●To Turn On your reception source easily between Antenna and Cable, Install an Antenna selector.
●If you are not receiving a Signal from your Cable service, contact the Cable provider.
Plugging in the AC Power Cord
Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are made.
Caution
●Do Not connect the AC Power Cord to an AC Power Supply outside the indicated voltage of this Unit (120V AC).
●Connecting the AC Power Cord to a Power Supply outside of this range may result in Unit failure, degradation or electrical shock.
Note(s)
●Each time you plug in the AC Power Cord, no operations will be performed for several seconds. This is not a malfunction.