Philips 600/MMS 506 Standby, Mute, Master Volume / +, Fade Rear / Front, Flat, GAME/ MOVIE/ Music

Explanation (Illustration page 3)

Remote Control ( See Illustration A)	Cable Connections (see illustration B)
À STANDBY	Inputs
To switch the speaker system into ON or OFF
(=STANDBY) mode	1.	INPUT 1 : 5.1-channel
Á MUTE		9 pin mini DIN cable to connect a 5.1-
		channel audio-visual source.
To switch the speaker system into mute	2.	INPUT 2 : STEREO CHANNEL
mode, and normal mode again
		3.5 mm stereo jack to connect a stereo
 MASTER VOLUME - / +		audio-visual source
To adjust the master volume higher or lower	3.	INPUT 3 : STEREO CHANNEL
à FADE REAR / FRONT		2 x RCA jack to connect a stereo audio-
		visual source.
To adjust the loudness of the rear and the
front satellite speakers	Output
Ä BASS - / +	4.	CENTER
To adjust the bass level according your per-		To connect the center satellite speaker.
sonal preference		(DIN jack)

English

ÅTREBLE - / +

To adjust the presence of the higher tones according to your personal preference

ÆFLAT

Removes any bass or treble boost applied by the user.

ÇGAME/ MOVIE/ MUSIC

Choose from either the game, movie or mu- sic button for optimal pre-set sound repro- duction per genre

ÈINPUT 1/ INPUT 2/ INPUT 3

Make your choice of audio-visual source selection. Two separate stereo input sources and one 5.1-channel input source can be connected to this multi-channel speaker system.

5.CENTER

To connect the center satellite speaker. (3.5mm stereo jack)

6.REAR RIGHT

To connect the rear right satellite speaker.

7.REAR LEFT

To connect the rear left satellite speaker.

8.FRONT RIGHT

To connect the front right satellite speaker.

9.FRONT LEFT

To connect the front left satellite speaker.

10.AC MAIN

Power cable to be connected to the AC outlet.

5

MMS506Final.p65 5 7/29/02, 2:12 PM