Philips 60PL9200D Connect Accessory Devices, Set Top Box to TV, DVD Player or DVD Recorder to

Connect Accessory Devices

1Set Top Box to TV

Pb

CABLE/

ANTENNA

HDMI

RVIDEO

Using HDMI

AConnect RF cable from wall to input at back of the cable box.

Set output switch on set-top box to CH 3 or 4 and tune TV to same channel.

In some cases, cable box will automatically tune to channel 3 or 4. Just change channels until picture appears.

BConnect cable box to TV using HDMI cable.

Note: If the accessory device has DVI output only, use a DVI to HDMI adapter cable to connect to the HDMI connector. You need to also connect the audio cable to L and R AUDIO jacks. Next, go to Menu=>Setup=>Source=>Analog Audio In=> and select HDMI.

Using RF Cable

AConnect RF cable from wall to input at the back of the cable box.

BUse second RF cable to connect the cable box to the TV's antenna input. This connection gives mono sound. For stereo sound use also composite audio/video connection (Refer to panel 3).

2DVD Player or DVD Recorder to

Pb Y

CABLE/

Using HDMI

ANTENNA

HDMI

RVIDEO

A

Connect DVD player/DVD recorder to the TV using HDMI cable.

B

Turn on TV and DVD Player/DVD recorder. Press CH+ or CH- on remote control to tune to the video supplied by HDMI.

Insert a prerecorded DVD into DVD player/DVD recorder and press PLAY to verify correct connection.

3DVD Player or DVD Recorder to

Using Composite Video Input (YPbPr)

A

Insert Component Video connectors into their corresponding jacks on both DVD player/DVD recorder and TV (Y, Pb and Pr).

B

Connect red/white audio cables into the audio output jacks on DVD player/ DVD recorder and audio AV inputs on TV.

C

Turn on TV and DVD player/DVD recorder. Press AV on remote control until the connected source appears on TV screen.

Insert a pre-recorded DVD into DVD player/DVD recorder and press PLAY to verify correct connection.

COMP VIDEO		S-VIDEO	VIDEO	AUDIO
Y	Pb			R
		OUT	OUT	OUT
	Pr			L

22