Philips 55PP 9701, 60PP9701 manual Surround Sound, Connect both external, Place the speakers so

SOUND MENU CONTROLS (CONTINUED)

	SURROUND SOUND
	y adding optional external
	Bspeakers to the TV's sound
	system, you can create the feeling
	of reflected sound that surrounds
	you at a movie theater or concert
	hall.
	BEGIN
1	Connect both external
	speakers to the speaker wire
	terminals on the TV.
	Recommended speakers: 8ohm, 15
	watt minimum. Be sure the (+) and
	(-) speaker wires are connected to
	the correct R(ight) and L(eft)
	speaker terminals on the TV.

REAR SURROUND SOUND

SPEAKER TERMINALS

SUBWOOFER OUTPUT Use the Subwoofer Output (RCA plug connector) to send the subwoofer audio channel signal (at line level) to an optional external powered Subwoofer speaker. The Subwoofer audio signal is for the playback of only the lowest frequency notes (under 100 Hz).

SMART

HELP

BACK OF TV

Remember, Surround Sound will not work with only one speaker connected; or with monaural audio material (unless Variable Audio Surround control is turned ON - see section below).

2 Place the speakers so the

viewing area is between the TV

and the rear surround speakers.

(See overhead view drawing.)

3 Turn TV ON and place the

STEREO control to the "STEREO

IF AVAILABLE" (✔) position.

After setup whenever a stereo

signal is received the audio will be

heard in Surround Sound.

STOP

VARIABLE AUDIO OUTPUT

he TV's Variable Audio Output

+ - + -

REAR SURROUND SOUND SPEAKERS

Note: The rear Surround Sound speakers will not be heard at the same volume level as the front TV speakers. It is intended for the rear speakers to give a background noise effect which requires a lower volume level than the TV's front speakers.

TV

SUBWOOFER

2

REAR SPEAKER REAR SPEAKER

PRIMARY VIEWING AREA

Tjacks can also be used for

Surround Sound. Once they are

connected to an external hi-fi

system its speakers can be used for

the playback of Surround Sound.

BEGIN

1 Connect the R(ight) and L(eft)

VARIABLE AUDIO OUT jacks

on the TV to the R and L Audio

Input jacks on your amplifier or

sound system.

2 Turn TV ON and place the

VARIABLE AUDIO OUTPUT on

screen control to the SURROUND

(✔) position. (Sound Menu 3 of 3).

Note:This will change the

Left/Right channel audio line level

signal at the Audio Output jacks to

the same signal found at the TV's

Surround Sound Speaker terminals.

STOP

						1	BACK OF TV
		SOUND MENU
		VARIABLE AUDIO OUTPUT
		EXIT			MORE...
					VARIABLE AUDIO OUTPUT
					3 OF 3
					STEREO
					SURROUND	VARIABLE AUDIO
AV				POWER
						OUTPUT JACKS
					EXIT
GUIDE		INFO
TV		VCR		ACC		AUDIO
					2	INPUT JACKS
SWAP	PIP CH		SOURCE
	DN	UP				R	L
FORMAT				AUTO
						AUX/TV INPUT
STATUS/				MENU/
EXIT				SELECT
						PHONO INPUT
VOL					2
		MUTE
1		2		3
4		5		6
7		8		9
100+		0		SURF
POSITION				PIP

AUDIO SYSTEM SPEAKERS USED AS REAR

SURROUND SOUND SPEAKERS

31