Philips 62PL9524, 55PL9524 setup guide Panel Jack Compatibility Information

Panel Jack Compatibility Information

1 AV 1 Input Jacks

Signals accepted: NTSC (480i).

Inputs available: YPbPr, S-Video (Y/C), and CVBS, plus audio left and right.

Use only one of the video signal inputs at a time.

If you should forget and have more than one type of signal connected, the set will automatically show the one of better quality: CVBS—good, S-Video—bet- ter, and YPbPr—best. For sound, connections must be made to the AV1 audio inputs.

2 MON OUT Output Jacks

Provide video and audio output signals from all TV when those sources are being viewed on the main screen. Output from the audio L/R jacks is at a fixed volume level; changing the TV volume does not affect them. Adjust the volume at your external home cinema system.

3 AV 2 Input Jacks

Signals accepted: NTSC (480i).

Inputs available: S-Video (Y/C) and CVBS, plus audio left and right.

Use only one of the video signal inputs at a time.

If you should forget and have both types of signal connected, the set will automatically show the S-Video, since it is of better quality than CVBS. For sound, connections must be made to the AV2 audio inputs.

4 SUB OUT Output Jack

Provides a signal to an external powered subwoofer.

5 AV3 Input Jacks

Signals accepted: NTSC (480i), 480p, 720p, and 1080i, plus audio left and right.

Inputs available: YPbPr, plus audio. For sound, connections must be made to the AV3 audio inputs.

6 AV4 Input Jacks

Signals accepted: NTSC (480i), 480p, 720p, and 1080i, plus audio left and right.

Inputs available: YPbPr, plus audio. For sound, connections must be made to the AV4 audio inputs.

7 TUNER Input Jack

Signals accepted: RF modulated NTSC.

Inputs available: 75Ω RF coaxial.

8 AV5 Input Connectors

Signals accepted: NTSC (480i), 480p, 720p, 1080i, and VGA plus audio left and right.

Inputs available: RGB+HV. For sound, connec- tions must be made to the AV5 audio inputs.

9 AV6 Input Connectors

Signals accepted: Digital only (TMDS [Transition Minimized Differential Signaling] encoded, uncom- pressed); DVI 480i, 480p, 720p, and 1080i, plus audio left and right.

Inputs available: DVI TMDS, plus audio. For sound, connections must be made to the AV6 audio inputs.

Intended use of the input: digital set-top boxes and inputs from other digital video devices.

NOTE: This DVI jack is not for computer con- nections. VGA cannot be connected.

	C
	2
1	SERVICE 1									9
			G S-VIDEO				DVI
2	AV1	R		L	V	AV6
		Pr		Pb	Y
3	MON OUT	R		L	V
							R	L
							R	L
4	AV2	R		L	V					8
			G S-VIDEO			AV5
	AV3 SUB OUT						RGB+HV			7
5		R		L	HD INPUTS		Pr	Pb	Y
					STANDARD/
										TUNER
6	AV4				STANDARD/		Pr	Pb	Y	10
		R		L	HD INPUTS

Jack Panel Located on the Left Side of the TV

Definitions:

NTSC—National Television System Committee.

CVBS—labeled “V,” provides a small step up in quality from the Tuner (RF) input. Called Composite Video.

S-Video (Y/C)—provides better picture quality than CVBS. Separates the signal into color and brightness.

YPbPr—provides the best quality video signal. Called Component Video Input, the signal is split into three parts, two color and one brightness.

10	SIDE JACK PANEL
	Signals accepted: NTSC (480i).
	Inputs available: S-Video (Y/C)

and CVBS, plus audio left and right.

Output available: Headphone. Only one of the inputs can be used at a time. Select the Side source, and the TV detects the input to which you have connected. Connections must be made to the audio inputs for sound.

8