Philips 660 manual Every week, Every three months, Keep the guard and cutter together because

Maintenance and cleaning (fig. 2-17 on pages 40 and 41)

•Always switch the shaver off before carrying out maintenance or cleaning.

•The rotating cutter blades of the Philishave system keep the shaved stubble neatly inside the shaving unit. In general, the shaving unit needs cleaning only once a week.

Every week

Fig. 2. Clean the guard slots using the short bristled end of the brush.

Fig. 3. Pull the shaving unit from the shaver.

Fig. 4 & 5. Clean the inside using the long bristled end of the brush.

Every three months

If your skin is of an oily type or if you have been using a pre- shave lotion, this procedure should be carried out once a

month.
Fig. 6.	Pull the shaving unit from the shaver.
Fig. 7.	Press the wheel downward and turn it anti-clockwise
	(see the arrow). Then lift the cluster frame holding
	the shaving heads from the shaving unit.
Fig. 8.	Slide one shaving head (guard and cutter) out of the
	frame. Keep your finger under the shaving head to
	prevent the cutter from falling out of the guard.
Fig. 9.	Keep the guard and cutter together because
	each pair has been especially ground to match
	each other. If the guards and cutters are mixed, it
	may take a couple of weeks before optimal shaving
	performance is restored.
Fig. 10.	Hold the cutter as shown...
Fig. 11	....and brush it carefully clean as illustrated.
	Use only the short bristled end of the brush.

Fig. 12.Clean the inside of the guard, using the long bristled end of the brush.

Fig. 13. Slide the shaving head back into place. Then clean the other two shaving heads one by one in the same way.

7