General description (fig. 1, page 3)

AShaving unit with three shaving heads. Each shaving head consists of a guard and a cutter.

BGreen pilot light. Illuminates whilst the shaver is connected to the mains supply (for charging or shaving directly from the mains). Goes out as soon as the rechargeable battery is full.

COn/Off switch. The shaver is prevented from being switched on accidentally by the locking device incorporated in the switch.

-On: keep the locking knob on the switch pressed-in and slide the switch upwards.

-Off: slide the switch downwards.

DMains cord. Using the mains cord you can connect the

shaver to any mains voltage between 100 and 240 Volts AC (for charging and shaving).

EConnector. When using the mains cord insert the small

plug firmly into the connector up to the indication mark.

FTrimmer. The trimmer can be switched on whilst the motor is running.

-Switch on by moving the slide (f) upwards.

-Switch off by moving the slide downwards.

-Brush the trimmer clean after use.

GBrush. Refer to section "Maintenance and cleaning" for correct usage.

HProtective cap. Keep the protective cap on the shaver when not in use.

Shaving tips

for a close, quick and comfortable shave

The best results are obtained if the skin is dry. So preferably shave before washing or some time afterwards.

If required, apply a preshave lotion. This can be particularly helpful if the climate is warm and humid.

The Philishave system gives you a quick, close and comfortable shave. Just move the shaving unit quickly over the skin.

5

Page 5
Image 5
Philips 660 manual General description, Shaving tips