Cleaning Your Communicator

Keep the Communicator free of dust by wiping it with a soft cotton cloth. If additional cleaning is required, follow the steps below:

1.Turn the POWER switch OFF, and unplug the power cord from the electrical outlet. Unplug the telephone cord from the wall jack. Note: You cannot use your Lifeline Service to call for help while the Communicator is turned off or the telephone cord is disconnected. Accordingly, you may wish to have a family member or caregiver present while you are cleaning your Communicator.

2.Slightly dampen a soft cloth with a mild all-purpose cleaner and gently wipe surfaces clean. Do not use detergent or abrasive cleaners on your Communicator.

3.Reconnect the power cord to the electrical outlet, reconnect the telephone cord to the wall jack, and then turn the POWER switch back ON.

4.Test your system by pressing your Personal Help Button and speaking through the Communicator with the Response Center.

Caution: Do not use spray cleaners directly on your Communicator. Excessive moisture could get inside the unit and cause damage.

Communicator Battery

Your Communicator uses a factory-installed battery located in the battery compartment beneath the unit. This battery will provide up to 30 hours of backup should you lose power. Lifeline will notify you if this battery needs to be replaced.

Communicator

Philips Lifeline 6900/6800/AT Series User’s Manual

17

Page 17
Image 17
Philips 6900, 6800 user manual Cleaning Your Communicator, Communicator Battery