Using the Wrist Strap
Call Philips Lifeline if you prefer a wrist strap and need one sent to you.
To attach:
1.Move the power switch on the back of the Lifeline Communicator to the OFF position before attaching the wrist strap.
2.Remove the watch pins at each end of the button by inserting a small paper clip or similar tool into the holes located on both outside edges.
3.Position the wrist strap over the back of the button.
4.Insert the watch pins over the wrist strap into the pin holes.
5.Be sure to move the power switch on the back of the Lifeline Communicator to the ON position.
To adjust:
1.Lift the fastener to loosen the wrist strap.
2.Adjust the wrist strap to the desired length and close the fastener. The wrist strap will slide easily on and off the wrist, with no further adjustment needed.
Personal Help Button
Philips Lifeline 6900/6800/AT Series User’s Manual | 25 |
