English
Before Operation - VCR part
Using your DVD+VCR for the very first time
For the following steps we assume that you have just connected your DVD+VCR for the very first time.
To make tuning TV stations an easy task your DVD+VCR incorporates the Automatic Channel Memory System (ACMS).This system will automatically tune, store TV channels and set the clock (date & time) in your DVD+VCR.
IMPORTANT!
If you have used a RF Antenna input connection, refer to ‘TV with RF Input only’ on page 13.
1 Make sure that you have correctly installed your DVD+VCR.
Press 1 to turn on your DVD+VCR.
If the initial Menu Screen doesn’t appear on screen, make sure that you have tuned your TV to a video channel. Or if this is correct it may mean that your DVD+VCR is already tuned.
2 Press b or B to select the desired country. (A:Austria, B: Belgium,CH: Switzerland, D: Germany, DK: Denmark, E: Spain, F: France, I: Italy, N: Norway, NL: Netherlands, P: Portugal, S:Sweden, SF: Finland, OTHERS)
3 Press OK to start the automatic tuning process.
01 | C02 | 00 | ARD |
02 | C03 | 00 | ZDF |
03 | C04 | 00 | WDR 3 |
S | E |
i | |
ACMS |
Programme number | TV Station |
PR01 | ARD |
PR02 | ZDF |
PR03 | WDR 3 |
PR04 | BR3 |
PR05 | HR3 |
PR06 | NDR3 |
The TV station shown above may vary according to the area you live in.
4 Press SYSTEM MENU to remove the menus from the TV screen.
Setting the clock Manually
The clock in your DVD+VCR controls time and date settings for your DVD+VCR.
The clock is set automatically during ACMS (Automatic Channel Memory System) when you DVD+VCR detects a channel that broadcasts a Teletext signal. If the broadcast signal is weak the clock will not be set and will require setting manually.
1 Press SYSTEM MENU.
Press b or B to select TIME DATE.
Press OK.
The auto adjust mode can be set to ‘OFF’ by pressing 3 or 4 if you want to set the time manually.
Press OK.
| AUTO ADJUST : ON |
|
|
|
|
|
|
| HH MN | DD MM YY | |||
| - - |
|
|
|
|
|
|
| - - | : - - | - |
| |
1 | 2 |
|
|
|
|
| 1 | 2 |
|
|
|
|
|
TIME |
|
|
|
|
| TIME |
|
|
| ||||
DATE |
| OK | i |
|
| DATE |
| i |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 Use the numbered buttons on the remote control to alter the HOURS, MINUTES, DAY, MONTH and YEAR.
Please note your DVD+VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00.
The day of the week will appear automatically when you enter the year.
| HH | MN | DD | MM | YY | |||
| 8 : | 00 | 1 | . 01 . | 04 | THU | ||
1 | 2 |
|
|
|
|
|
|
|
TIME |
|
|
|
|
|
|
| |
DATE |
|
|
|
|
| i |
| |
|
|
|
|
|
|
|
|
|
3 If you make a mistake press b or B and enter the correct details.
4 Press SYSTEM MENU.
12
