Philips 721VR 5, 8, 9

English

Operation with tape (Continued)

Timer recording using On Screen

Display

You may set up to seven timer record events within one

month of the current date.

Note

Before setting the timer make sure that you have set the

DVD+VCR clock correctly and you know which stations

you have tuned TV stations on your DVD+VCR.

Timer Recording function will only active if the

DVD+VCR is in Standby mode.

1Insert a video cassette with protection tab into your

DVD+VCR.

The video cassette should have the window side facing

up and the arrow facing away from you.

2Press SYSTEM MENU.

Press 1or 2to select REC.

Press OK.

3Press OK to start setting the timer record event.

If all timer record events are full press 3or 4to select

the event that you wish to remove and replace.

Press 1to delete the event.

4Press the numbered buttonsto enter the station that

you wish to record.

When selecting stations 1 - 9,press 0 first, then the

channel number;for example Stations 3 - 03.You may

also select Channels by pressing 3or 4.Once selected

press 2.

If you wish to record from AUDIO IN (L/R) and VIDEO

IN on the front or from the EURO SCART sockets on

the back of your unit,press INPUT to select for correct

display (AV1,AV2 or AV3).

5Press the numbered buttonsto enter the date of the

programme.

If you press OKbefore entering the date you may select

one of the following automated recording features.Use

1or 2to select,then press OK to confirm.

DLYTo r ecord every day (except Saturday and Sunday)

at the same time.

SU ~ SATo r ecord at the same time every week.

6Press the numbered buttonsto enter the recording

start and end times of the programme that you wish to

record.

Please note your DVD+VCR uses a 24 hour clock.e.g.

1pm will be displayed as 13:00.

You may also select the start and end times by using 3or

7Press 3or 4to switch VPS/PDC on or off.

Press 2to select the recording speed.

Press 3or 4to select the desired tape speed

(SP,IP,or LP).

IP mode determines how much tape is left and switches

speed from SP to LP,if necessary,to complete recording

the program.IP mode cannot be selected when

VPS/PDC is ON.

Press SYSTEM MENU to set another timer record

event and follow steps 3 to 7.

8Check that the timer event details are correct.

Press SYSTEM MENU twice.

If PLEASE CHECK is displayed,you have entered

incorrect and will need to re-enter the data.

Press 11to switch your DVD+VCR Standby mode.

TIMER will appear in the display window while your

DVD+VCR waits to make the recording.

To watch a DVD during timer recording standby mode,

press POWER and DVD to switch to DVD mode.

9Press STOPto end recording.

Notes

●If at a later date you wish to delete or change any of

the settings in timer event memory you may do so

without having to enter all the timer event information

again.Simply display the timer event screen. Use 3or 4

to select the event that you wish to deleteor change.

Press 1to delete the event...or

Press OK to change;then press 1or 2to select; Station,

Date,Start and End times and LP. Press 3or 4to enter

the correct information.

●If Timer record events Overlap...

Make sure that the preset times of the timer recording

events do not overlap.If they do, the earlier programme

will always be given priority.

Example:

Programme 1 is programmed to start at 16:00 and end at

17:00.

Programme 2 is programmed to start at 16:30 and end at

17:30.

(In this case,Programme 1 will be recorded in its entirety,

but only the last 30 minutes of Programme 2 will be

recorded.)



PR DATE T I M E

- - - -

- -

- - - - SP

- -

- - - - - -- -~::

- - - - - - - -~::