31
1Switch on the TV set. If required, select the programme number for
the DVD recorder.
2Switch on the DVD recorder using STANDBY/ON m.
3Press SYSTEM-MENU on the remote control. The menu bar
appears.
4Select 'A' symbol with Dor C.
Language
AudioLanguage English
Recordingaudio Language1
Subtitle English
Menu English
Country Other
5Select line 'Language' with CH- Bor CH+ A. and confirm with
the Cbutton.
6Select line 'Recording audio' and confirm with C.
7Select 'Language 1'or'Language 2' with CH- Bor CH+ Aand
confirm with OK .
8To end, press SYSTEM-MENU .
Setting the time and date
If the display shows an incorrect time or '--:--', the time and date must be reset manually.
If a TV channel which transmits TXT/PDC (teletext/PDC) is stored under programme number
'P01', the time and date will automatically be taken from the TXT/PDC information.
1Press SYSTEM-MENU on the remote control. The menu bar
appears.
2Select 'A' symbol with Dor C.
3Select 'Installation' using CH- Bor CH+ Aand confirm with C.
4Select 'Time/Date' using CH- Bor CH+ Aand confirm with C.
Installation
Time/Date
Time 20:00
Year 2003
Month 01
Date 01
To exit press
SYSTEMMENU
5Check if the time in 'Time' is correct. If required, change the time
with the number buttons 0..9 on your remote control.
6Check 'Year', 'Month' and 'Date' in the same way. To move between
the fields, use CH- Bor CH+ A.
7Check the displayed settings and confirm with OK .
'Stored' will appear briefly on the screen.
8To end, press SYSTEM-MENU .
ENGLISH
Installing your DVD recorder