64
Timer
ShowViewsystem
Date
01 Prog.
BBC1 Start
20:15
VPS
PDC End
21:30
Rec
Mode
M2
Mo-Fr/Weekly
PressSELECT To store
PressOK
6The decoded data appears after confirmation. You can go back and
change the data. Select the appropriate input field with Cor D.If
required, make changes using CH+ A,CH- Bor the number
buttons 0..9 .
'Switching on 'VPS/PDC' in the 'Start' input field
Select the 'Start' input field using C. Using SELECTswitch on 'VPS/PDC'
('*' lights up). If you press SELECT again, you will switch 'VPS/PDC' off ('*'
goes out).
Changing the recording mode in input field 'End'
Select the 'End' input field using C.
Use SELECT to select the recording mode 'M1,M2,M2x,M3,M4,M6'. Tip
7If all information is correct, press the OK button. The programming
information is stored in a TIMER block.
8To end, press TIMER .
9Insert a recordable disc (one without write protection).
The disk you have inserted will be checked.
0Switch the DVD recorder off with STANDBY m.
The programmed recording will only function properly if the DVD
recorder has been switched off using the STANDBY mbutton.
If any of the TIMER blocks are in use, 'TIMER' will light up on the recorder display.
Programming a recording (TIMER)