46
Recording without automatic switchoff
1Switch on the TV set and select the programme number for the DVD
recorder.
2Insert a disc on which the recording is to be made. This disc is then
checked for content and system. READING' will appear on the display.
aIndex display
bA DVD+RW disc has been inserted that already contains recordings. Use
the CH+ Aor CH- Bbutton to select the point where the recording is
to start.
aThe message 'EMPTYDISC' appears in the display
bThe disc inserted is a blank DVD disc.
aA dialog box appears asking you whether you want to delete the
contents or eject the disc
bThe disc inserted is a DVD+RW but its contents are not DVD
video-compatible (e.g. a data disc). Recordings on this disc can only be
made if the entire disc is first deleted with the REC/OTR nbutton.
aThe message 'Title limit' appears on the screen if a recording is to
be made
bA disc may contain a maximum of 48 titles (including blank titles). Delete
titles or change the disc. Problem
3If necessary, use the MONITOR button on the remote control to
switch to the internal tuner in the DVD recorder.
4Use CH+ Aor CH- Bto select the programme number (station
name) you want to record. This will appear on the display:
1 FREETITLE P01 Programme numbers of the external inputs:
'EXT1'Scart socket at the back EXT 1 TO TV-I/O
'EXT2'Scart socket at the back EXT 2 AUX-I/O
'CAM1'Front SVHS/audio sockets S-VIDEO/left AUDIO right
'CAM1'Front video/audio sockets A/V S-VIDEO/left AUDIO right
Switching between the S-VIDEO and VIDEO sockets takes place
automatically. If both sockets are in use, the signal at the
S-VIDEO socket has priority.
'CAM2'Digital Video (i Link) front socket DV IN Tip
5To start recording, press REC/OTR non the remote control or
RECORD on the DVD recorder.
If you want to start the recording at the end of the existing
recordings, hold down the REC/OTR nbutton until the message
'SAFE REC' appears on the display.
For DVD+R discs each new recording is always added at the end of
all previous recordings as existing recordings cannot be overwritten.
This will, for example, appear in the display:
Manual recording