69

'Vertical video shift'

Use this feature to adjust the position of the picture on your TV left or right using D,Cto
suit your TV set.

'SCART video'

By default the recorder is set to 'RGB'. Select 'S-Video' if you want to connect an S-VHS
recorder.
Sound settings
Depending on which audio outputs are used, you can select the settings in this menu.
If you only use the analogue audio output ( OUT L AUDIO R ), select the settings 'Off' in the
'Digital output' menu.
Sound
Digitaloutput All
Analogueoutput Stereo
Nightmode Off

'Digital output'

For devices connected to the DIGITAL AUDIO OUT socket, you can select from the following
settings.
'All': Dolby Digital and DTS signals are fed unaltered to the digital output. MPEG-2multi-channel
signals are converted to PCM (Pulse Code Modulation).
For receivers/amplifiers with digital multichannel sound decoders.
'PCM only: DolbyDigital and MPEG-2multi-channel signals are convertedto PCM (Pulse Code
Modulation).
For receivers/amplifiers without digital multichannel sound decoders.
'Off: Digitaloutput switched off.
For devices with analogue audio input.

'Analogue output'

For devices connected to the analogue audio output ( OUT L AUDIO R), you can select from
the following settings.
'Stereo': For devices without DolbySurround or TruSurround. Use this setting if the DVD
recorder is only connected to a stereo TV set.
'Surround: DolbyDigital and MPEG-2multi-channel are mixed down toa DOLBY
surround-compatible two-channel output signal. For devices with Dolby Surround
Pro Logic decoder .

'Night mode'

Night mode optimises the sound for playback at low volume. You are therefore less likely to
disturb your neighbours. This only works for Dolby Digital audio on DVD video discs.
ENGLISH
User preferences