12English
4Remove the protective screen in front of the UV light bulb.
To remove the screen, gently lift it up (1) and pull it out (2).
5 Remove the UV light bulb.
To remove the light bulb, grasp it and pull it out of the metal clasp.
6 Clean the protective screen and the UV light bulb with a damp cloth. 7 Reinsert the UV light bulb.
To reinsert the light bulb, align the bottom of the light bulb with the metal clasp and push the bulb into the clasp.
8Reinsert the protective screen.
To reinsert the screen, align the pegs on the screen with the slots on the reflective surface near the UV light bulb.Then insert the pegs into the slots and slide down the screen to secure it in the sanitizer.
Storage
-If you are not going to use the product for an extended period of time, unplug it from the electrical outlet, clean it and store it in a cool and dry place away from direct sunlight.You can use the cord wrap to store the power cord in an organized manner.
-You can store brush heads on the pegs at the back of the charger.
Replacement
Brush head
-Replace Sonicare brush heads every 3 months to achieve optimal results.
-Use only Sonicare ProResults replacement brush heads.
UV light bulb
-Replacement UV bulbs are available through your Sonicare Customer Service Center in North America by calling
Disposal
-The rechargeable battery inside your Sonicare cannot be replaced, but is easy to remove for recycling. At the end of product life and prior to
disposal, please remove the rechargeable battery from the handle by following the instructions below.
-Do not throw away the appliance or the UV light bulb (bulb contains mercury) with the normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By doing this, you help to preserve the environment.
-If you have any recycling questions, contact your local waste management office.
Removing the rechargeable battery
Please note that this process is not reversible.
-To remove the rechargeable battery, you need a
