Philips 900 Series  English, Brushing modes Clean mode, Sensitive mode, Massage mode, Features

Models: 900 Series

1 32
Download 32 pages 9.24 Kb
Page 8
Image 8
English

English

Brushing modes

Clean mode

Standard mode for superior teeth cleaning.

Sensitive mode

Gentle, yet thorough cleaning for sensitive gums and teeth.

Massage mode

Gentle gum stimulation.

Brushing routines

Go Care routine

1-minute brushing cycle in the Clean mode, for a quick clean.You hear the Quadpacer signal at 15-second intervals.

Max Care routine

3-minute brushing cycle that combines the Clean and Massage modes in one routine for a thorough mouth clean.There are 30 seconds of Clean mode and 15 seconds of Massage mode for each of the 4 sections of your mouth.You will hear the Quadpacer signal at 45 second intervals.

Note: When Sonicare is used in clinical studies, the default 2- minute Clean mode must be selected.The handle should be fully charged. Deactivate the Easy-start feature and for areas where excess staining occurs, an additional 30 seconds of brushing time can be spent to assist with stain removal.

Features

Easy-start

-This Sonicare model comes with the Easy-start feature activated.

-The Easy-start feature gently increases power over the first 14 brushings to ease into the Sonicare experience.

Note: Each of the first 14 brushings must be at least 1 minute in length to properly move through the Easy-start ramp-up cycle.

Deactivating or activating the Easy-start feature

1Attach your brush head to the handle.

2Place the handle in the plugged-in charger.

-To deactivate Easy-start:

Press and hold the power button for 5 seconds.You hear 1 beep to indicate that the Easy-start feature has been deactivated.

-To activate Easy-start:

Press and hold the power button for 5 seconds.You hear 2 beeps to indicate that the Easy-start feature has been activated.

Note: Using the Easy-start feature beyond the initial ramp-up period is not recommended and reduces Sonicare’s effectiveness in removing plaque.

Smartimer

The Smartimer indicates that your brushing cycle is complete by automatically turning off the toothbrush at the end of the brushing cycle.

Page 8
Image 8
Philips 900 Series  English, Brushing modes Clean mode, Sensitive mode, Massage mode, Brushing routines Go Care routine