English 15
-Clean the pre-filter when the filter cleaning light flashes to ensure optimal functioning of the appliance.
1Unplug the appliance.
2Place your fingers in the recesses of the side panels and gently pull the bottom of the front panel towards you.Then lift the hooks at the top of the panel out of the top of the appliance.
3To remove the pre-filter, grab the two projections and pull the filter towards you.
4AC4004 only: remove the multi-care filter from the back of the pre- filter.
5Wash the pre-filter under a running tap. If the pre-filter is very dirty, use a soft brush to brush away the dirt.
Tip: Alternatively, you can clean the pre-filter by removing the dust with a vacuum cleaner.
6Air-dry the pre-filter.
Note: Make sure that the pre-filter is completely dry.
7AC4004 only: reattach the multi-care filter to the back of the pre- filter.
Note: Make sure that the front of the multi-care filter is pointing towards the pre-filter.
8Put the pre-filter back into the appliance.Attach all hooks properly to the appliance.
Note: Make sure that the side with the two projections is pointing towards you.