Philips AC4004 AC4002 only adding the multi-carefilter, Environment, guarantee and service

Models: AC4002 AC4004

1 21
Download 21 pages 17.94 Kb
Page 18
Image 18
AC4002 only: adding the multi-care filter

English 21

AC4002 only: adding the multi-care filter

AC4002 comes with the pre-filter, activated carbon filter and the HEPA filter. For this appliance, only the filter cleaning light of filter 1 (pre-filter) and the filter replacement light of filter 3 and 4 (activated carbon filter and HEPA filter) have been activated.

If you want to enjoy the benefits of the multi-care filter, you can purchase this filter separately (see the table above). In combination with the HEPA filter, the multi-care filter filters out dust, pollen and ultrafine particles larger than 20 nanometres, including bacteria and some viruses. According to publications of the World Health Organization, the avian and human influenza viruses and Legionella bacterium are larger than 20 nanometres. After installing the multi-care filter, you have to activate the filter replacement indication of filter 2 in the following way:

1Simultaneously press and hold the reset button for filter 1 (pre-filter) and the reset button for filter 2 (multi-care filter) for 2 seconds.

-To deactivate the filter replacement indication of filter 2, simultaneously press and hold the reset button for filter 1 (pre-filter) and the reset button for filter 2 (multi-care filter) for 2 seconds.

Note:To check whether the filter replacement indication of the multi-care filter is active or not, press the reset button for filter 2. If the filter replacement light of filter 2 goes on for a few seconds, the filter replacement indication of the multi-care filter is active. If the filter replacement light of filter 2 does not go on, the filter replacement indication is not active.

Environment

-Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment.

guarantee and service

If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer.

Troubleshooting

This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Centre in your country.

Page 18
Image 18
Philips AC4004 AC4002 only adding the multi-carefilter, Environment, guarantee and service, Troubleshooting, English

FAQ

How do I add the multi-care filter to my AC4002 air cleaner?

To add the multi-care filter to your AC4002 air cleaner, purchase the filter separately and follow the installation instructions provided in the official manual.

How do I activate the filter replacement indication for the multi-care filter?

To activate the filter replacement indication for the multi-care filter, simultaneously press and hold the reset button for filter 1 pre-filter and the reset button for filter 2 multi-care filter for 2 seconds.

Where can I recycle my AC4002 air cleaner at the end of its life?

Do not throw away your AC4002 air cleaner with normal household waste. Hand it in at an official collection point for recycling to help preserve the environment.