Screen displays (continued)
33Media remaining memory display Displays the remaining time.
•In P2 CARD REMAIN on the setting menu DISPLAY SETUP screen, select TOTAL to display total remaining time for all inserted cards or
•No indication is made while the remaining time is being calculated.
•An ongoing loop recording is indicated as “LOOP” and in MODE CHECK, the standard recording time appears after loop recording ends.
•The remaining time indication starts to flash when a total of less than 2 minutes remains.
•The remaining time is indicated in 1 minute increments between 0 to 999 minutes.
34Operational state display REC: Recording PAUSE: Recording pause
: Play pause
: Play
( ):
( ): Slow play (Reverse slow play)
CHK: Rec check
( ): Cue (reverse cue)
( ):
× /× (× /× ):
35Media information display
The card slot where the P2 card was inserted and the basic information of the media are displayed here.
1 2 lights: P2 card on which data can be recorded.
1 2 lights green: P2 card on which data is to
be recorded.
1 2 flashes: Card recognition underway.
- - : No card inserted.
P:
F: Full memory
X: Cannot recognize
E: Card with format error (becomes normal if formatted)
36Special recording display
This display appears when the REC
FUNCTION option of the setting menu RECORDING SETUP screen is set to
INTERVAL, ONE SHOT or LOOP, and when
PRE REC is set to ON.
37Monitor sound volume level meter When you press the PAGE/AUDIO MON/ VAR button, the sound volume output from the builtin speaker and headphone jack is displayed.
38Safety zone
The range of the zone is indicated by the
SAFETY ZONE item (Page 108) on the DISPLAY SETUP screen.
4:3: This indicates the position which is cropped to 4:3.
13:9: This indicates the position which is cropped to 13:9.
14:9: This indicates the position which is cropped to 14:9.
90%: This indicates the range (90%) in which signals can be displayed by an ordinary homeuse TV set.
90