Adding shot marks to clips
Adding shot marks ( M ) will make it easier to find the clips you are looking for.
1 Push the Operation lever in the W or Q direction to move the yellow frame to the clip to which you will add a shot mark.
2 Press the USER button to which the shot mark function has been allocated. (Page 42)
To release a shot mark, repeat the above steps.
•When the video data of a single shot is recorded in multiple P2 cards, you cannot set or release shot marks unless all the P2 cards that make up the video data are inserted into slots.
Clearing the thumbnail screen
Before performing setting menu operations (Page 94), you must clear the thumbnail screen. Release this in the same way when the camera- recorder is to be controlled from a nonlinear editor.
1 Press the THUMBNAIL button.
THUMBNAIL
The normal playback standby screen (1394 input mode) appears.
Direct shooting functions
If you press the START/STOP button (red) in MCR mode, CAM mode will be automatically activated, and shooting will start.
66