Warnings

COPY INHIBITED

Can not record correctly because of the input signal copy-guarded.

EXTERNAL1394 DISCONNECT

When the 1394 CONTROL item of the OTHER FUNCTIONS screen of the Setup menu is set to EXT and recording without connecting external units with 1394 terminal, this display appears.

INCOMPATIBLE CARD

The card cannot be used since it does not comply with the specified standard.

RUN DOWN CARD

The maximum number of overwrites on the P2 card has been exceeded.

Operation continues. However, recording or playback may not operate correctly. It is recommended that you replace the P2 card with another one.

DIR ENTRY NG CARD

The directory structure on the P2 card is not supported.

Operation continues. However, recording or playback may not operate correctly.

The P2 card cannot be used for the special recording functions (interval recording, one-shot recording, and loop recording).

Back up data on the P2 card as soon as possible, and format the card before using it again.

FORMAT ERR !

This card is not compliant with the P2 standard.

LOW BATTERY

No operations can be performed since the battery charge is low.

<Thumbnail operations>

CANNOT ACCESS

Cannot access clips.

CANNOT DELETE

Cannot delete clips.

CANNOT FORMAT

Cannot format P2 cards or SD memory cards.

CANNOT REPAIR Cannot repair clips.

CARD FULL

The P2 card does not have enough free space for recording.

WRITE PROTECTED

The P2 card or SD memory card is writeprotected.

NO CARD

A P2 card or SD memory card has not been inserted.

NO FILE

There are no files (version upgrade files, etc.).

Errors

These are displayed when an error occurs in the unit, P2 card, or other component. If the problem is not fixed by turning the power off and then on again, either replace the card based on the error information, or consult with your dealer as to which one is to be purchased.

CANNOT PLAY

 

This is displayed when trouble has occurred

 

during playback.

 

CARD ERR (1) (2) (1/2)

 

(Trouble has occurred in the P2 card found in the

 

slot indicated by the number.)

 

CLIP ERROR (clip trouble)

 

UPDATING (clip recording)

 

ERROR (other type of trouble)

 

SYSTEM ERROR

 

This is displayed when trouble has occurred in

 

the system. Switch ON the power again.

 

P2 MICON ERROR (no P2 microcomputer

 

response)

 

P2 CONTROL ERROR (trouble in P2 control)

 

REC RAM OVERFLOW (recording RAM

 

 

overflow)

Displays

This display appears when an abnormality occurs

TURN POWER OFF

 

as a result of the card being pulled out while data

 

is being accessed.

 

REC WARNING

 

This is displayed when trouble has occurred

 

during recording. Carry out recording once again.

 

If the warning persists, consult your dealer.

 

CARD ERR (1) (2) (1/2)

 

(Trouble has occurred in the P2 card found in the

 

slot indicated by the number.)

 

•If the warning continues, turn off the power.

•If the warning appears even when recording is carried out again, replace the card with another one.

ERROR (other type of trouble)

(Continued on the next page)

91