Using the LCD

1 Set the POWER switch to ON.

2 Hold down the OPEN button to open the LCD monitor.

•It can open out to 120 degrees. Do not try to open it further as this will damage the camera.

OPEN button

3 Position the LCD monitor where it is easiest to see.

•The monitor can be rotated 180 degrees toward the lens and 90 degrees toward you.

•Do not apply unnecessary force to the open LCD. This can damage the camera.

• Ensure the LCD is fully closed.

Emphasizing outlines

Emphasizing the outlines of the images you see in the viewfinder or on the LCD makes it easier to focus.

Emphasizing the outlines does not effect the images you shoot.

1 In CAM mode, press EVF DTL.

“EVF DTL ON” appears on the screen for about 2 seconds.

Preparation

BARS

SHUTTER

SPEES SELECT

CH1 SELECT CH2 SELECT

INPUT1

INPUT2

INT(L)

INT(R)

ON

ON

INPUT1

INPUT2

OFF

OFF

INPUT2

 

MIC POWER+48V

 

AUDIO

 

ZEBRAREC OIS

COUNTER

RESET/TC SET

LCD

 

EVF DTL

WFM

EVF DTL button

Press EVF DTL again to return to the original display. “EVF DTL OFF” appears on the screen for about 2 seconds.

21