Philips AJ7030D user manual Connect power C, Set clock

Note

•You can only use AC power as power supply. The pre-installed lithium CR2032 battery can only back up time and alarm.

•When power is disconnected, the display backlight is off.

For first-time use:

Remove the protective tab to activate the battery. To replace the battery: B

Connect power C

Caution

•Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the clock radio.

•Risk of electric shock! When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord.

Set clock

1 In standby mode, press and hold SET for two seconds to activate clock setting mode.

2	» [12H] or [24H] is displayed.
	Press TUNING +/- or / repeatedly to select 12/24
3	hour format.
	Press SET again to confirm.
4	» The hour digits begin to blink.
	Repeat Steps 2 to 3 to set the hour and minute.