6 Other features
Set alarm timer
Set alarm
In standby mode, you can set two alarms to ring at different time.
Note
•Make sure that you have set the clock correctly.
1 Press and hold AL1/AL2 for two seconds to activate alarm setting mode.
»The hour and minute digits begin to blink.
2Press / and / repeatedly to set the hour and minute.
3Press AL1/AL2 to con rm.
Select alarm source
Note
•For alarm sound, you can select buzzer, your last listened radio chanel, or latest played audio in your iPod/iPhone.
Adjust AL1/2 RADIO·BUZZ·DOCK control to select alarm source for both alarms.
Tip
•When alarm time comes, the selected radio, buzzer, or iPod/iPhone turns on.
•If iPhone is selected as alarm source, while no iPod/iPhone is connected, the clock radio switches to buzzer source instead.
Activate/deactivate alarm timer
1Press AL1/AL2 to view alarm settings.
2Press AL1/AL2 again to activate or deactivate the alarm timer.
»The alarm icon appears if alarm timer is on and disappears if it is off.
• | To stop the ringing alarm, press the |
|
• | corresponding AL1/AL2. |
|
The alarm repeats ringing for the | English | |
| next day. | |
|
|
Snooze alarm
When alarm sounds, press SNOOZE.
»The alarm snoozes and repeats ringing nine minutes later.
To adjust alarm interval (in minutes), press SNOOZE repeatedly.
Set sleep timer
This clock radio can switch to standby mode automatically after a preset period.
Press SLEEP repeatedly to select the sleep timer period (in minutes).
»When the sleep timer is activated, appears.
To deactivate the sleep timer, press SLEEP repeatedly until [OFF] (off) appears.
15 30 60 90 120
off
Play audio from an external device
You can listen to audio from an external device through this clock radio.
1Connect the MP3 link cable to:
•the MP3 LINK socket.
•the headphone socket of an external device.
2Press MP3 LINK to select MP3 link source.
3Start to play the external device (see the user manual of this device).
Adjust display brightness
Press BRIGHTNESS repeatedly to select different brightness levels.
EN 9