Philips AS170 user manual Get started, Connect power, Turn on, Select a source, Set time

3 Get started

ON Standby

Always follow the instructions in this chapter in	POWER
sequence.

Connect power

Caution

•• Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the docking system.

•• Risk of electric shock! When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord.

Note

•• The type plate is located on the bottom of the docking system.

Connect the AC power adapter between

•the DC IN socket at the back of the docking system, and

•the power supply.

Turn on

Press POWER.

»»The docking system switches to the last selected source.

6EN

Switch to standby mode

Press POWER again to switch the docking system to standby mode.

»»The clock (if set) is displayed.

Select a source

Press SOURCE/SET repeatedly to select a source: FM preset, FM, Bluetooth, or AUX in.

Note

•• When an android-powered device is docked, the system automatically switches to Bluetooth mode.

Set time

1 Press and hold SOURCE/SET for two seconds.

»»[24H] or [12H] begins to blink.

2 Press - TUNE/TIME or TUNE/TIME+ to select [24H] or[12H] for 12 or 24 hour format.

3 Press SOURCE/SET to confirm.

»»The hour and minute digits begin to blink.

4 Press - TUNE/TIME or TUNE/TIME+ repeatedly to set the hour.