Programming track
numbers
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1 In the stop position, press PROG to
activate programming.
Display:
ÜPROG and 00 flash. (See 5)
2 Press
∞
or
§
to select your desired track
number.
3 Press PROG to store the desired track
number.
Display:
ÜPROG and 00 flash for you to
program the next track..
4 Repeat steps 2 to 3 to select and store all
desired tracks in this way.
If you attempt to store more than 20 tracks, no
Ü
track can be selected and the display
shows --.
5 To play your program, press
2
/
;
.
Helpful hints :
– When playback of your program comes to the
stop position, your set will return to normal
playback. To re-enter program mode, press
PROG in the stop position.
Reviewing the program
In the stop position, press PROG repeatedly
to see your stored tracks.
Erasing a program
You can erase the contents of the memory
by:
– in the stop position, press PROG to
enter program mode, and then press
9.
– selecting
FM
,
MW
or
OFF
;
– opening the CD door;
Different play modes:
REPEAT. and SHUFFLE
(See 6, 7)
REPEAT
You can play the current track or the whole
disc repeatedly, and combine REPEAT
modes with PROG (PROGRAM).
REP – plays the current track continuously.
REP ALL – repeats the entire CD/program
1 To select play mode, press REPEAT once
or more.
The display shows
ÜREP icon or REP ALL icon.
2 Press 2; to start playback if in the stop/
pause position.
3 To return to normal playback, press
REPEAT repeatedly until the modes are no
longer displayed.
– You can also press 9 to cancel your play
mode.
SHUFFLE
You can play all the tracks in random order.
1 In the stop position, press SHUFFLE to
switch on shuffle play.
Display shows
ÜSHUFFLE icon.
2 To switch off shuffle play, press 9.
Helpful hints:
– During the shuffle play, when rEP function is
selected, it will play the current shuffled track
repeatedly, or when the rEP ALL function is
selected, it will repeat the shuffle play of the
entire CD.
CD Player