CD Player
Playing a CD
•This CD player plays Audio Discs including
•MP3,
IMPORTANT!
CDs encoded with copyright protection technologies by some record companies may be unplayable by this product.
1Adjust the Source selector to CD.
2Open the CD door
3Insert a CD with the printed side facing up, then press the CD door gently to close.
➜Display shows
3Press 2 ; to start playback.
4To pause playback, press 2;.
➜ Display: 2 flashes. (See 3)
5To resume, press 2; again.
6To stop CD playback, press 9.
Helpful hints:
CD play will also stop when:
–you open the CD door;
–you select FM, MW or OFF sound source;
–the CD has reached the end.
Selecting a different track
•Press ∞ / § once or repeatedly until the desired track number appears in the display.
•In the pause/stop position, press 2; to start playback.
Finding a passage within a track
1During playback, press and hold ∞ or § .
➜The CD is played at high speed and with reduced volume.
2When you recognize the passage you want, release ∞ or § to resume normal playback.
Helpful hints:
–When your searching reaches the end of the last track, the CD goes to stop mode.
Programming track num- bers
You may store up to 20 tracks in the desired sequence. If you like, store any track more than once.
1In the stop position, press PROG to activate programming.
➜Display: PROG and 00 flash. (See 4)
2Press ∞ or § to select your desired track number.
3Press PROG to store the desired track number.
➜Display: PROG and 00 flash for you to program the next track..
4Repeat steps 2 to 3 to select and store all desired tracks in this way.
➜If you attempt to store more than 20 tracks, no track can be selected and the display shows
5To play your program, press 2;.
Helpful hints :
–When playback of your program comes to the stop position, your set will return to normal playback.To