Philips AZ1142 manual Digital Tuner, Tuning to Radio Stations

DIGITAL TUNER

TUNING TO RADIO STATIONS

1.	Select TUNER source.
™	is displayed briefly and then the radio station
	frequency is shown.		CD
2.	Press BAND once or more to select your waveband.		PROGRAM
			REPEAT
			ALL
3.	Press SEARCH ∞ or § and release when the frequency in
	the display starts running.
™ The tuner automatically tunes to a station of sufficient
	reception. Display shows	during automatic tuning.

™If a FM station is received in stereo, STEREO is shown.

4.Repeat step 3 if necessary until you find the desired station.

• To tune to a weak station, press SEARCH ∞ or § briefly and repeatedly until you have found optimal reception.

5.Adjust the power slider to TAPE/OFF position to switch off the set.

To improve radio reception

–For FM, pull out the telescopic aerial. Incline and turn the aerial. Reduce its length if the signal is too strong (very close to a transmitter).

–For MW, the set is provided with a built-in aerial so the telescopic aerial is not needed. Direct the aerial by turning the whole set.

Favourite station selection

For your favourite 3 tuner stations, you can use the easy one-touch programming and selection 1, 2 or 3 buttons.

1.	Tune to your desired station (see Tuning to radio stations).	PEAT
		CD
		GRAM
2.	To store your station, press 1, 2 or 3 for 2 seconds or more.	ALL
™ Display: shows PROGRAM briefly, your favorite preset station
	number and the tuner frequency.

Programming radio stations

You can store up to a total of 30 radio stations in the memory.

1.Tune to your desired station (see Tuning to radio stations).

2.Press PROGRAM to activate programming.

– Display: PROGRAM flashes.

3.Press PRESET 4 or 3 once or more to allocate a number from 1 to 30 to this station.

4.Press PROGRAM again to confirm the setting.

– Display: PROGRAM disappears, the preset number and the frequency of the preset station are shown.

5.Repeat the above four steps to store other stations.

–You can overwrite a preset station by storing another frequency in its place.

Tuning to preset stations

Press 1, 2, 3 or PRESET 4 or 3 until the desired preset station is displayed.

		BAND
		PRESET
1	2	3

SEARCH

PROGRAM

	B
PRESET	AND

1 2 3

SEARCH

PROGRAM

		BAND
		PRESET
1	2	3

SEARCH

PROGRAM

English

7