Philips AZ1142 manual CD Player, Playing a CD, Selecting a different track

English

CD PLAYER

Playing a CD

1.Select CD source.

™ is displayed briefly.

2.Lift the CD door open.

™Display: when you open the CD door.

3.Insert a CD or CD-R(W) with the printed side facing up and

close the CD door.

™Display: d1SC flashes as the CD player scans the contents of

a CD. The total number of tracks and playing time are then shown.

Display:	is shown if the CD-R(W) is blank or not
finalised.

4.Press PLAY•PAUSE 2; to start playback.

™Display: Current track number and elapsed playing time of the track during CD playback.

5.To pause playback press PLAY•PAUSE 2;. Press PLAY•PAUSE 2; again to resume play.

™The display freezes and the elapsed playing time flashes when playback is paused.

6.To stop CD playback, press STOP 9.

Note: CD play will also stop when:

–the CD door is opened;

–the CD has reached the end

(unless you have selected REPEAT or REPEAT ALL);

–you select another source: TAPE / TUNER.

Selecting a different track

•Press SEARCH ∞ or § once or repeatedly until the desired track number appears in the display.

•If you have selected a track number shortly after loading a CD or in the PAUSE position, you will need to press PLAY•PAUSE 2; to start playback.

Finding a passage within a track

1.Press and hold down SEARCH ∞ or §.

™The CD is played at high speed and low volume.

2. When you recognize the passage you want, release SEARCH ∞ or §.

– Normal playback continues.

Note: During a CD programme or if SHUFFLE/ REPEAT active, searching is only possible within a track.

1

PLAY•PAUSE

CD

PROGRAM

REPEAT

ALL

1 2

PLAY•PAUSE

CD

PROGRAM

REPEAT

ALL

CD
MODE	SEARCH
	STOP

PROGRAM

1

PLAY•PAUSE

CD

PROGRAM

REPEAT

ALL

CD
MODE	SEARCH
	STOP

PROGRAM

PLAY•PAUSE

CD

PROGRAM

REPEAT

ALL

CD
MODE	SEARCH
	STOP

PROGRAM

CD RA AZ1140

8