Philips AZ1330 user manual Basic Function/Radio, MP3-CD/CD Player, Basic functions, Digital tuner

Basic Function/Radio MP3-CD/CD Player

Basic functions

Switching on/off the set

1To switch on, press POWER.

➜Display lights up. The system will switch to the last selected source.

2To switch off, press POWER again. ➜ Display lights off.

Adjusting volume and sound

Adjust the sound with the VOLUME and DBB controls.

Digital tuner

Tuning to radio stations

1Press repeatedly SOURCE (or TUNER on the remote control) to select FM or MW.

➜“TUNER” is displayed briefly, then the radio station frequency, waveband and, if programmed, a preset number are shown (See 2).

2Press and hold ∞ or § until the frequency in the display starts running.

➜The radio automatically tunes to a station of sufficient reception. Display shows “SEARCH” during automatic tuning.

3Repeat step 2 if necessary until you find the desired station.

•To tune to a weak station, press ∞ or § briefly and repeatedly until you have found optimal reception.

To improve radio reception:

•For FM, extend, incline and turn the telescopic aerial. Reduce its length if the signal is too strong.

•For MW, the set uses a built-in aerial. Direct this aerial by turning the whole set.

Programming radio stations

You can store 15 FM and 10 MW radio stations in the memory manually or automatically (Auto store).

Manual programming

1Tune to your desired station (see Tuning to radio stations).

2Press PROG to activate programming. ➜ Display: PROG flashes.

3Press ALBUM/PRESET +/-

(ALBUM/PRESET 3, 4 on the remote control ) once or more to allocate a number (from 1 to 25).

4Press PROG to confirm.

5Repeat steps 1-4 to store other stations.

Helpful hints:

–You can erase a preset station by storing another frequency in its place.

Autostore

Autostore automatically starts programming radio stations from preset 1. Any previous presets e.g. manually programmed will be erased.

1Press repeatedly SOURCE (or TUNER on the remote control) to select FM or MW.

2Press PROG until “AUTO” flashes.

➜Available stations are programmed (MW or FM). After all stations are stored, the first autostore preset station will then automatically play.

To listen to a preset or autostore station

Press the ALBUM/PRESET +/-

(ALBUM/PRESET 3, 4 on the remote control ) buttons once or more until the desired preset station is displayed.