MP3-CD/CD Player
Finding a passage within a track
1During playback, press and hold down ∞ or §.
➜The disc is played at high speed and low volume.
2When you recognize the passage you want, release ∞ or §.
➜ Normal playback resumes.
To erase a program
You can erase a program by:
–pressing 9 (twice during playback or once in the stop position);
–selecting FM, MW, AUX or DOCK;
–pressing POWER to power off;
–opening the disc door.
➜“PROGRAM CLEAR” scrolls across the display once, and “PROG” disappears.
Programming tracks
You may store up to 20 tracks in the desired sequence. If you like, store any track more than once.
1In the stop position, press ∞ or § to select your desired track number.
•For
2Press PROG to store desired track.
➜Display shows “PRO 2” , indicating the programmed location (See 5).
•If you attempt to program without first selectig a track, display will show “SELECT TRACK” briefly, then the total track number and playing time.
3Repeat steps 1 to 2 to select and store all desired tracks.
4Press 2 ; to play the program.
➜“PROG” is dispalyed during program playback.
To review your program
In the stop position, press and hold PROG 3 seconds.
➜The display shows all the stored tracks (and album numbers for MP3) in sequence.
Helpful hints:
–Display shows “NO PROG” if no track is programmed.
–If you try to store more than 20 tracks, no track can be stored and the display will show ”PROGRAM FULL”.
Selecting different play modes (See 6)
You can select and change the various play modes before or during playback, and combine play modes with PROG.
REP – plays the current track continuously. REP ALL – plays the entire disc/program
continuously.
SHUF – plays all tracks in random order. REP ALL SHUF – plays all tracks in random order continuously.
1To select play modes, press MODE on the set (REPEAT or SHUFFLE on the remote contorl) once or more.
2Press 2; to start playback if in the stop position.
➜Shuffle play will start automatically soon after shuffle mode is selected.
3To select normal playback, press MODE on the set (REPEAT or SHUFFLE on the remote control) repeatedly until the various play modes are no longer displayed.
–You can also press 9 to cancel your play modes.
Helpful hints:
–Shuffle (SHUF and REP ALL SHUF) play is not available in the program mode.
