Philips AZ1836 USB Connection, CD Ripping Recording disc files to a USB device, To record one

USB Connection

•Non-supported file formats are skipped. This means that e.g.: Word documents .doc or MP3 files with extension. dlf are ignored and will not be played.

•AAC, WAV, PCM. NTFS audio files

•DRM protected WMA files

•WMA files in Lossless format

Playing a USB mass storage device

1Make sure that your AZ1836 is being powered by AC mains or specified batter- ies.

2Adjust the source selector to CD/USB.

➜Display shows - - - (see 2), or - - - with USB (see 3)

3Press CD/USB to enter USB mode if USB is NOT displayed.

➜Display will show USB (see 2).

4As shown in figure # , plug a compatible USB mass storage device to AZ1836’s USB

port marked . If needed, use a suitable USB cable to connect between the device and AZ1836’s USB port.

➜The device will automatically power on.

• If the device is not powered on, turn on the power manually, then re-connnect it.

➜AZ1836’s display shows USB and the total number of playable audio files (Max.

displayed track number is 1000) stored on the device.

5Press 2; on your AZ1836 to start play.

➜AZ1836’s display will show USB and share the display information illustrated in the disc operation.

Helpful hints:

–Make sure that file names of MP3 files end with .mp3. and the file names of WMA files end with .wma.

–For DRM protected WMA files, use Windows Media Player 10 (or later) for conversion. Visit www.microsoft.com for details about Windows Media Player and WM DRM (Windows Media Digital Rights Management).

–For USB device playing, if the display shows "OL", it means that the USB device is electrical- ly overloading AZ1836.You need to change a USB device.

CD Ripping - Recording disc files to a USB device

AZ1836 allows you to copy the music files or spoken contents of a disc to the external USB device.You can record one track, the whole disc or even selected tracks through the Program function.

1Adjust the source selector to CD/USB.

2Insert a disc (audio CD or MP3 or WMA). If desired, program the disc.

3Press CD/USB to enter CD mode if USB is displayed.

4Plug a USB mass storage device.

To record one

5a Select the track you want to record.

5b Press once or repeatedly USB REC (or REC on the remote) until ONE appears, flashing.

➜Disc playback will start automactially from the beginning of the selected track.

➜REC is displayed, and ONE will flash 2 seconds then disappear (see 8).

To record all

5a Press repeatedly USB REC (or REC on the remote) until ALL appears, flashing.

➜Disc playback will start automactially from the beginning.

➜REC and ALL are displayed, and ALL will flash 2 seconds then disappear (see 9).

6To stop recording, first press 9, then unplug the USB device.

•In the record-one mode, the playback will auto go to the stop position after one track/file comes to an end.

•During MP3 and WMA recording, make sure the playback of the file you want to record is wholly completed before manually stop recording. Or any part of the file will not be recorded.

•During recording, if the memory of the USB device runs out, playback will not continue.